Checker pocket photometer for manganese HR, 0,0 to 20,0 mg/l | S/M

HI709 Details: Ideal for plating, the HI-709 high range Manganese Checker is a simple, accurate and cost effective way to measure high ranges of manganese in water. Checker®HC is supplied with reagents for 6 tests. Use code HI-709-25 (25 tests) for future purchases. The HI-709 high range Manganese Checker is a simple, accurate and cost effective way to measure high ranges of manganese in water. Designed as a more accurate alternative to chemical test kits, the HI-709 provides quick, accurate results in four easy steps. HI-709 uses an adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Periodate method. The reaction between manganese and the reagents cause a pink tint in the sample. Ideal for Water quality Education Industrial Environmental Key features Small palm-sized design Accurate from ± 0.02 ppm ±5% of reading Dedicated to a single parameter Auto power off after 10 minutes of inactivity Built-in timer for timed reaction readings Order Information The HI-709 Manganese High Range Checker is supplied with sample cuvettes with caps (2), Manganese High reagent starter kit (HI-709-25 reagents for 25 tests), glass cylinders with rubber cap (2), battery, instructions and quick start guide. You can also buy HI-709-11 Calibration check set. Replacement reagents HI-709-25 Manganese high range reagents 25 tests. Four steps. One click. Instant Readout. img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_1.jpg"Step 1width=200height=200  1. ‘Zero’ the Checker®HC with your vial & water sample inside img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_2.jpg"Step 2width=200height=200  2. Take the vial out and add your reagent img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_3.jpg"Step 3width=200height=200  3. Place your vial into your Checker®HC img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_4.jpg"Step 4width=200height=200  4. Press the button and read the results   Use Reagents HI-709-25 for HI-709 Manganese HR handheld Colorimeter – Checker®HC Use HI-709-11 Calibration Check Sets for HI-709 Manganese HR handheld Colorimeter – Checker®HC Range   0.0 to 20.0 ppm Resolution   0.01 ppm Accuracy (@ 25°C)   ± 0.2 ppm ± 5% of reading Light Source   LED @ 525 nm Light Detector   Silicon photocell Environment   0 to 50°C (32 to 122°F); RH max 95% non-condensing Battery Type   (1) 1.5V AAA Auto-off   After 10 minutes of non-use Dimensions   81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5) Weight   64 g (2.25 oz.) Method   adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Periodate method. The reaction between manganese and the reagents cause a pink tint in the sample