Water resistant pocket pH, conductivity (EC) up to 20 mS /cm | S

The HI-98130 is a water resistant tester that offers high accuracy pH, conductivity, total dissolved solids and temperature measurements in a single meter.
Key features

Automatic 1 or 2 point pH calibration
Rubberised keyboard
Quick and easy to operate
Easy switch between Celsius & Fahrenheit readouts
HOLD function
Easy to replace pH electrode cartridge with sturdy snap-in connector means there are no pins to bend or break
Large LCD display
pH and temperature displayed simultaneously
Automatic temperature compensation
BEPS Battery Error Prevention System
Floating waterproof casing with tactile grip makes testing easier
Removable safety cap

Main benefits

This floating, waterproof combination tester has an easy to read display and automatic shut-off pH and EC/TDS readings are automatically temperature compensated
The EC/TDS conversion factor is user selectable as well as the temperature compensation coefficient
Features a replaceable pH electrode cartridge together with an EC/TDS graphite electrode
Automatic shut-off helps preserve battery life
Replaceable pH cartridge extends life of the tester – when pH sensor is exhausted, simply replace it with a new one
Calibrate direct into Hanna buffer solution sachets

Supplied with

HI 73127 pH electrode
HI 73128 electrode removal tool
Batteries
Instructions

High accuracy EC/TDS graphite probeThe graphite conductivity probe provides greater accuracy because it cannot be contaminated by salt deposits in the solution.The exposed temperature sensor provides fast response times and guarantees highly accurate temperature compensated readings.For replacement probe quote part number: HI 73127

Range – pH
 
0.00 to 14.00 pH

Range – EC
 
0.00 to 20.00 mS/cm

Range – TDS
 
0.00 to 10.00 ppt

Range – Temperature
 
0.0 to 60.0°C / 32 to 140.0°F

Resolution – pH
 
0.01 pH

Resolution – EC
 
0.01 mS/cm

Resolution – TDS
 
0.01 ppt

Resolution – Temperature
 
0.1°C / 0.1°F

Accuracy – pH
 
±0.05 pH

Accuracy – EC/TDS
 
±2% F.S.

Accuracy – Temperature
 
±0.5°C / ±1°F

Temperature Compensation
 
pH: automatic; EC/TDS: automatic with ß adjustable from 0.0 to 2.4% / °C

Calibration – pH
 
automatic, 1 or 2 points with 2 sets of memorized buffers(pH 4.01 / 7.01 / 10.01 or 4.01 / 6.86 / 9.18)

Calibration – EC/TDS
 
automatic, 1 point

TDS Conversion Factor
 
adjustable from 0.45 to 1.00

pH Electrode
 
HI 73127 (replaceable; included)

Environment
 
0 to 50°C (32 to 122°F); RH max 100%

Battery Type / Life
 
4 x 1.5V / approx. 100 hours of continuous use;auto-off after 8 minutes of non-use

Dimensions
 
163 x 40 x 26 mm (6.4 x 1.6 x 1.0)

Weight
 
100 g (3.5 oz.)

/table
For replacement probe quote part number: HI-73127.