Checker pocket photometer for copper HR; 0,00-5,00 mg/l | S/M

HI702 Details:
Ideal for freshwater & saltwater aquariums. The HI-702 Copper high range Checker is a simple, accurate and cost effective way to measure high ranges of copper in water. Checker®HC is supplied with reagents for 6 tests. HI-702 uses an adaptation of the EPA method. The reaction between copper and the bicinchoninate reagent causes a purple tint in the sample.
Ideal for

Water quality
Education
Plating
Wastewater
Environmental
Freshwater Aquariums

Key features

Small palm-sized design
Accurate from ±0.05ppm ±5% of reading
Dedicated to a single parameter
Auto power off after 10 minutes of inactivity
Built-in timer for timed reaction readings

Order Information
The HI-702 Copper high range Checker is supplied with sample cuvettes and caps (2), Copper HR reagent starter kit x 6 tests (re-ordering information: Hi-702-25 x 25 tests), battery, instructions and quick start guide.
Also available: HI-702-11 Calibration set.
Four steps. One click. Instant Readout.
img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_1.jpg"Step 1width=200height=200 1. ‘Zero’ the Checker®HC with your vial & water sample inside
img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_2.jpg"Step 2width=200height=200  2. Take the vial out and add your reagent
img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_3.jpg"Step 3width=200height=200  3. Place your vial into your Checker®HC
img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_4.jpg"Step 4width=200height=200  4. Press the button and read the results
Use HI-702-11 Calibration Set with HI-702 Copper High Range Handheld Colorimeter – Checker®HC.
Use HI-702-25 Reagents with HI-702 Copper High Range Handheld Colorimeter – Checker®HC, 25 Tests