Checker pocket photometer for copper LR, 0,000 to 1,500 mg/l | S/M

HI747 Details:
Ideal for fresh water aquariums, the HI-747 Copper low range Checker is a simple, accurate and cost effective way to measure low ranges of copper in water. Checker®HC is supplied with reagents for 6 tests.
The HI-747 Copper low range Checker is a simple, accurate and cost effective way to measure low ranges of copper in water.
Designed as a more accurate alternative to chemical test kits, the HI-747 provides quick, accurate results in four easy steps.
HI-747 uses an adaptation of the EPA method. The reaction between copper and the bicinchoninate reagent causes a purple tint in the sample.
Ideal for

Water quality
Education
Plating
Wastewater
Environmental
Freshwater Aquariums

Key features

Small palm-sized design
Accurate from ±10 ppb ±5% of reading
Dedicated to a single parameter
Auto power off after 10 minutes of inactivity
Built-in timer for timed reaction readings

Order Information
The HI-747 Copper high range Checker is supplied with sample cuvettes and caps (2), Copper LR reagent starter kit for 6 tests (re-ordering information HI-747-25 x 25 tests), battery, instructions and quick start guide.
Also available: HI-747-11 Calibration set
Four steps. One click. Instant Readout.
img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_1.jpg"Step 1width=200height=200  1. ‘Zero’ the Checker®HC with your vial & 10ml water sample inside
img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_2.jpg"Step 2width=200height=200  2. Take the vial out and add your reagent
img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_3.jpg"Step 3width=200height=200  3. Place your vial into your Checker®HC
img src=https://hannainstruments.co.uk/img/cms/CheckerReagent_4.jpg"Step 4width=200height=200  4. Press the button and read the results
 
Use HI-747-25 Reagents for HI-747 Copper Low Range Checker®HC, x 25 tests
Use HI-747-11 Calibration Set for HI-747 Copper Low Range Checker®HC.